Home -
Artificial Stones - Installation of Ceiling Tile Design
-
-
Use wheel zoom
in
About "Installation of Ceiling Tile Design" :
CUSTOM DESIGNS AND FINISHES
Custom designs are available upon request. The standard factory finish included in the price of the tile is a ceiling white satin latex. In addition, approximately 1,300 custom colors are available, as well as faux finishes.
INSTALLATION REQUIREMENTS
The tiles will drop into any standard commercial 15 / 16" T-Bar suspension grid, consisting of pre-punched roll-formed steel with exposed flange surface. Main runners and cross runners shall be installed to form 2' x 2' square openings. The grid shall be hung flat and level, suspended by 12 gauge pre-straightened steel wire @ 4' O.C.
Material shall be installed in accordance with the following recommendations: White gloves shall be worn by installers while handling ABOVE VIEW ceiling tiles. All boxes of tiles shall be kept in a vertical position on the job site with the red arrow pointing up in order to prevent breakage.